‘
- Hign-concerned Chemical: None
- Is Smart Device: no
- Size: 9 inch
- Style: Classic
- Surface Finishing: Brass
- Model Number: 2988-A,29A86
- Feature: Thermostatic Faucets,Cold and Hot
- Surface Treatment: Blackened
- Number of Handles: Single Handle
- Valve Core Material: Ceramic
- Type: Fixed Rotatable Type
- Cold/Hot Water Control Type: Single Holder Dual Control
- Origin: Mainland China
- Certification: none
- Showers for bathroom: tropical shower system
- Rainfall shower set: full bathroom showers
- black shower set: bathroom and shower faucets
- Features: multifunctional nozzle,water saving
WELCOME TO MY SHOP
If you have any questions about our products, please feel free to contact me, I will help you, thank you for your love of our products.
2988-A
NEW UPGRADE
SHOWER BATH FAUCET SET
SIZR INFORMATION
ALL ATTACHMENTS
1. Shelf 2. Handheld shower stand
3. Raw meal glue 4. Plastic wrench
5. Water pipe retainer 6. Install the curved angle
7. Curved angle gasket 8. Decorative cover
9. L-shaped tube 10. Shower head
11. Hose 12. Faucet valve
13. Hand shower 14. Straight pipe
one button three control
EXPLOSION-PROOF CURVED CORNER
Shower height adjustment
360° rotary adjustment
Movable shelf
Rotatable
Up&Down.Not Restricted By Height
Flexible & Simple Operation
DETAILS DISPLAY
Stainless Steel Hand shower
Hose
Shelving
Shelving Derails
Faucet valve interface
Behind the faucet valve
FINISHED DISPLAY
How to install
Installation of shower head and other parts
1.Put the shower tube and the L-shaped tube well and connect the mixer
2.Fix the assembled parts on the fixed accessories and mark them inside
3.Use an electric drill to make holes at the marked points
4.Use a hammer to drive the expansion nail into the wall
5.Screw in the screw with a screwdriver
6.After the fixing accessories are installed, fix the shower tube, L-shaped tube and mixer, and tighten the screws
7.Install other components according to the position shown in the figure
Shower mixer installation
1.Wrap the two brass adapters around the Teflon tape and screw them into the mounting holes with a wrench
2.Put the decorative cover into the brass adapter
3.Insert the washer into the hexagonal nut on the back of the faucet and align the faucet to the position of the brass adapter
4.Rotate the position of the two brass adapters to correspond to the nut position of the faucet
5.Wrap the outer end of the brass adjuster with the Teflon tape, use a wrench to tighten the nut
29A86
Reviews
There are no reviews yet.